Beijer Electronics X2 pro User Manual

Image and CODESYS update
5.3 iXDeveloperprojectstatusafter
panelimageupdate
On X2 pro, X2 extreme, X2 marine and X2 control, the iX Developer project is
unchanged after a panel image update is performed. If the panel image upgrade is
made over ethernet, an additional dialog will pop up to confirm an erasing of the
current iX Developer project. The default setting is not to erase the iX Developer
project.
5.4 UpdatingtheCODESYSruntime
usingethernet
To update the CODESYS Runtime, the folder containing the CODESYS
.cab-files listed below must be specified in the Image Loader utility. The exist
ing
Power Management- and EtherCAT DistributedClocksettingsareshowninthe
Image Loader utility, and can be set before updating the CODESYS Runtime.
BeijerElectronics, MAEN205G
22

Beijer Electronics X2 pro Specifications

General

Brand	Beijer Electronics
Model	X2 pro
Category	DC Drives
Language	English