Beijer Electronics X2 pro User Manual

Booting
2Booting
2.1 Welcomescreen
1.
Apply power to the operator panel.
2.
Within 20–30 seconds, the welcome screen will appear.
The following items about theoperatorpanelarelisted:
• Size of external memory card, if applicable
• IP address
• Panel image version
If a project has been downloaded to the panel, it will be lo aded automatically.
If there is no project in the panel, touching the screen will display the service menu
.
If there is an SD card inserted into the panel, and the project o n the SD card differs
from what is saved in the operator panel, then the user is asked i f the project and
IP-settings should be restored.
The welcome screen for a X2 control 10 panel
Position Description
1Paneltype.
2 ExternalMemorycardstatus.
3 Networkstatus. Anattachednetworkcableisindicatedwithan
asterisk.
4 Panelimagemainversionandbuildnumber.
BeijerElectronics, MAEN205G
8

Beijer Electronics X2 pro Specifications

General

Brand	Beijer Electronics
Model	X2 pro
Category	DC Drives
Language	English