Beijer Electronics X2 pro - Page 24

Image and CODESYS update
4.
When asked if DC support for EtherCat should be installed, answering Yes or
No will have the following consequences
Yes: LAN A will be reserved for EtherCAT and LAN B for ethernet
communication
No: Both LAN A and LAN B can be used for ethernet communication
5.
Answer Yes when asked if Power-fail supported retain should be enabled
6.
RemovetheUSBflashdriveandrebootthepanel
Note:
BeforedownloadinganewCODESYSRuntime,thepanelimageshouldalwaysfirstbe
downloadedtotheoperatorpanelagain,eveniftherearenochangestothepanel
image. IfonlytheCODESYSRuntimeisinstalled,thenthismayresultinproblems
connectingtoandcommunicatingwithotherdevices.
BeijerElectronics, MAEN205G
24