4
3) REMOVAL OF FACIA PANEL
REMOVE THE CONTROL KNOBS
REMOVE THE 4 SECURING SCREWS
AS SHOWN (2 EACH SIDE)
PULL FACIA AWAY TO REMOVE
FULLY DISCONNECT THE WIRING TO
THE TIMER
4) REMOVING THE DOOR SEALS
THE DOOR SEAL IS REMOVED BY
JUST PULLING IT IS SECURED IN THE
GAP BETWEEN THE CAVITY AND
FRONFRAME AND REQUIRES NO
OTHER FIXING
T O REFIT PUSH IN ALWAYS ENSURE
THAT DOOR SEAL LIP IS FACING
CORRECT WAY
To Next Page
Loading...
