Belling IH302T - Finish cooking

10
4. While the zone selection indicator is ashing, touch the plus or minus
key to select the required power level.
• If a power level is not selected within 1 minute, the induction hob will
automatically switch off.
• When needing to modify the power level, touch the relevant heating
selection zone key again until the power level indicator is ashing.
While the power level indicator is ashing, use the plus or minus key
to adjust the power level.
Ifthedisplayashes alternately with the heat setting
This means that:
• You have not placed a pan on the correct cooking zone or;
• The pan you’re using is not suitable for induction cooking or;
• The pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone. The display will
automatically turn off after 1 minute if no suitable pan is placed on it.
Finish cooking
Touch the relevant heating zone selection control for the zone that you
wish to turn off. An indicator will ash next to the control to indicate which
zone is currently selected.
Turn the cooking zone off by touching the minus
key repeatedly until the display shows 0, or by
touching the plus and minus keys together.
Turn the whole hob off by touching the On/Off control key.