Belling IH302T - Before locating the fixing brackets; Adjusting the bracket position

20
Beforelocatingthexingbrackets
The unit should be placed on a stable, smooth surface (use the packaging).
Adjusting the bracket position
After placing the hob into the worktop cutout with the seal, secure the appliance in place using the four
worktop xing brackets and screws. The worktop xing brackets can be installed either way up depend-
ing on the thickness of the worktop. Ensure that there is a small gap between the worktop xing brack-
ets and the underside of the worktop to allow space for heat expansion.