Belling IH302T - Start cooking

9
Make sure that the base of your pan is smooth, sits at against the glass. Use a pan which is at least as
large as the circle printed on the glass. Using a pan which is slightly wider than the glass circle printed
on the glass will maximise energy-efciency. Always centre your pan on the cooking zone.
Always lift pans off the ceramic hob – do not slide, or they may scratch the glass.
Start cooking
After switching the hob on, the buzzer will beep once. All the indicator lights light up for a second and
go out, to indicate that the ceramic hob is now in standby mode.
1. Touch the on/off power key until you hear a beep and all the displays
show dashes. This indicates that the hob is now in standby mode.
2. Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the bottom of the cooking
zone are clean and dry.
3. Touch the relevant heating zone selection control. An indicator will
ash next to the control to indicate which zone is currently selected.