EasyManua.ls Logo

Belling IH302T - Before using the Hob; Touch controls; Choosing the right Cookware

Belling IH302T
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Before using the Hob
Read this guide, taking special note of the ‘Safety Warnings’ section.
Remove any protective lm that may still be on your ceramic hob.
Touch controls
Use the at of your nger, not the tip. The controls respond to touch, so you don’t need to apply any
pressure. The touch control keys take approximately 1 second to respond to your touch. Always ensure
the touch control area is clean, dry and free from any objects (e.g. utensils, tea towels and cloths),
spillages and water may make the controls difcult to operate. A beeping sound will be activated and
will keep on beeping every 10 seconds, to attract your attention, please remove any objects and clean
the area as appropriate.
Choosing the right Cookware
Only use cookware with a base suitable for induction cooking. Look for the induction symbol on the
packaging or on the bottom of the pan.
You can check whether your cookware is suitable by carrying out a magnet test. Move a magnet
towards the base of the pan. If it is attracted, the pan is suitable for induction. The base of the pan
must be magnetic across the whole diameter of the base.
If you do not have a magnet:
1. Put some water in the pan you want to check.
2. If does not ash in the display and the water is heating, the pan is suitable
Cookware made from the following materials are not suitable: pure stainless steel, aluminium or
copper without a magnetic base, glass, wood, porcelain, ceramic, and earthenware.
Do not use cookware with jagged edges or a curved base.

Related product manuals