23
Make sure the induction cooker hob is well ventilated and that air inlet and outlet are not blocked.
In order to avoid accidental touch with the overheating bottom of the hob, or getting unexpectable
distance of 50mm from the bottom of the hob. Follow the requirements below.
WARNING: Ensuring Adequate Ventilation
There are ventilation holes around outside of the hob. YOU MUST ensure these holes are not
blocked by the worktop when you put the hob into position.
•
Be aware
that the glue that joins the plastic or wooden material to the furniture, has to resist to
temperature not below 150°C, to avoid the paneling becoming unstuck.
• The rear wall, adjacent and surrounding surfaces must therefore be able to withstand an
temperature of 90°C.
Min. 5 cm
Max. 5 mm Max. 5 mm
To Next Page
Loading...
