9
least as large as the circle printed on the glass. Using a pan which is slightly wider than the glass
zone.
1
T
/
once and the displays show ‘-’ or ‘--’ to indicate that the hob is
in standby mode.
2. Place a suitable pan on the cooking zone that you wish to use.
•
Make sure the bottom of the pan and the bottom of the cooking
zone are clean and dry.
3. Touch the relevant heating zone selection control key for the
zone you wish to use, until the power level indicator next to it
Start cooking
After switching the hob on, the buzzer will beep once. All the indicator lights light up for a second to
indicate that the induction hob is now in standby mode.
To Next Page
Loading...
