Need help?Do you have a question about the Bender ISOMETER iso415R and is the answer not in the manual?
General| Brand | Bender |
|---|---|
| Model | ISOMETER iso415R |
| Category | Measuring Instruments |
| Language | English |
Guidance on effective manual usage for operational understanding and reference.
Explains safety symbols (Danger, Warning, Caution) and information indicators used throughout the manual.
Instructions for proper inspection, transport, and storage of the device to prevent damage.
Details critical safety precautions and risks, emphasizing de-energizing before work.
Defines the device's purpose as an insulation monitoring device for IT systems per IEC 61557-8.
Lists the key technical features and capabilities of the ISOMETER® iso415R.
Explains the core functionality of insulation fault monitoring, location, and associated features.
Describes how to perform a manual self-test to check device functions and relay operations.
Instructions for DIN rail and screw mounting of the device.
Details the connection diagrams and terminal assignments for the iso415R-24 and iso415R-2 models.
Explains the supply voltage requirements and connection for both iso415R-24 and iso415R-2.
Explains the layout and components of the device's control panel.
Details the function of AL1 and AL2 LEDs indicating prewarning and main alarm states.
Describes functions activated by the T/R button: RESET, TEST, NFC, ADDR, PROTECT.
Introduces Modbus function codes, read/write accesses, and data types.
Comprehensive mapping of Modbus registers to their functions and descriptions.
Troubleshooting common issues with the RS-485 interface.
Addresses problems with alarm relays and terminal connections.
Specifies parameters for the measuring circuit and adjustable response values.
Provides specifications for the RS-485 interface, including protocol and baud rate.
Covers connection properties, environmental ratings, standards, and ordering information.
To Next Page
