Need help?Do you have a question about the Bender ISOMETER IRDH375 and is the answer not in the manual?
General| Brand | Bender |
|---|---|
| Model | ISOMETER IRDH375 |
| Category | Measuring Instruments |
| Language | English |
Guide on manual usage, symbols, and safety notes.
Bender's contact and service offerings for product assistance.
General safety guidelines and precautions for device operation.
Safety rules for personnel working on electrical installations.
Specific safety warnings and precautions for the ISOMETER® device.
Defines the proper application and usage scope of the ISOMETER® device.
Guidelines and precautions for correct device installation.
Shared features and capabilities of both IRDH375 and IRDH375B.
Specific features and functionalities of the IRDH375B model.
Detailed overview of the ISOMETER® IRDH375 and its applications.
Explanation of the core operational principles and measurement processes.
Procedures for performing automatic and manual self-tests for device verification.
The role of Relay K3 in signaling device faults and common messages.
Extended functionalities specific to the IRDH375B model.
Instructions for connecting the device's plug-in terminals and wiring precautions.
How to connect the ISOMETER® with various coupling devices.
Overview of the device's operational features, display, and keys.
Explanation of the device display information in standard operating mode.
Details on how the device display appears when navigating menu options.
Description of the function keys and their roles in operation and menu navigation.
Visual representation of the device's menu hierarchy and navigation flow.
Graphical layout of the HISTORY INFO menu for data retrieval.
Setting alarm response values, relay principles, and fault memory.
Configuration for coupling devices, leakage capacitance, clock, and self-tests.
Setting the BMS interface address, ISOnet function, and ISO monitor.
Procedure for activating and setting a password for device protection.
How to set the display language for fault messages on the device.
Menu for Bender service personnel for fault clearance.
Checking and setting parameters remotely using a PC and browser.
Details on the RS-485 interface using the IsoData protocol for IRDH375.
RS-485 interface for BMS protocol, including network topology and wiring.
Details of the BMS protocol, Master/Slave principle, and device addressing.
Tabulated technical specifications and values for the IRDH375(B).
List of standards, approvals, and certifications relevant to the ISOMETER®.
Graphs illustrating response times in relation to system leakage capacitances.
Information on product types, nominal voltages, and article numbers.
To Next Page