Bender ISOMETER IRDH375 - Standards, Approvals and Certifications

Technical data IRDH375(B)
83
IRDH375_D00124_05_M_XXEN/01.2020
9.2 Standards, approvals and certifications
The ISOMETER® was designed under consideration of the following standards:
- DIN EN 61557-8 (VDE 0413-8): 2015-12
- DIN EN 61557-8 Ber 1 (VDE 0413-8 Ber 1): 2016-12
- IEC 61557-8: 2014
- IEC 61557-8:2014/COR1: 2016
Subject to change! The specified standards take into account the edition valid
until 01.2020 unless otherwise indicated.