Safety instructions
16
IRDH375_D00124_05_M_XXEN/01.2020
2.4 Intended use
The ISOMETER® is intended for:
monitoring the insulation resistance of IT systems
Use for the intended purpose also includes
compliance with all information in the operating instructions
and
compliance with test intervals.
In order to meet the requirements of the applicable standards, customised pa-
rameter settings must be made on the equipment in order to adapt it to local
equipment and operating conditions. Please heed the limits of the range of
application indicated in the technical data.
Any use other than that described in this manual is regarded as improper.
To Next Page
Loading...
Need help?
General
