Bender ISOMETER IRDH375 - 8 Factory Settings

77
IRDH375_D00124_05_M_XXEN/01.2020
8. Factory Settings
Menu Submenu Factory setting
1. EXIT
2. HISTORY INFO
3. ISO SETUP 1. Exit
2. Alarm1: 40 kΩ
3. Alarm2: 10 kΩ
4. K1: N.O
5. K2: N.O
--------- K3: N.C fixed setting
6. Memory: off
7. M+/M-:* 0-20 mA*
4. ISO ADVANCED 1. Exit
2. AGH: no
3. Ce. max: 150 μF
4. Measure: AMP
5. Autotest: 24h
6. Clock:* CET (HH:MM)*
7. Date:*
current date
(DD.MM.YYYY)*
8. Test:* 12:00*
5. COM SETUP* 1. Exit*
2. Addr:* 3 (Slave)*
3. ISOnet:* off*
4. ISO Monitor:*