Bender RCMA421H - Querying and Erasing the Fault Memory in the HIS Menu

Operation and configuration
25
RCMA421H_D00069_00_M_XXEN/05.2014
5.7.4 Querying and erasing the fault memory in the HIS menu
1. Select the HIS menu.
2. Select the saved error and erase if applicable.
3. To go back to the menu level, press and hold down the ENTER button
for more than 1.5 seconds.
8. Switch sub-
menu
9. Go back to
SEt menu
HiS menu
Error display/Submenu
1. Error:
Rated residual operating cur-
rent exceeded
2. Switch error display
3. Error code E.03
see page 30
4. Switch error display
SEt menu
Select submenu
Change/activate/
deactivate param.
Change pa-
rameter value
display
Change/apply
param.