Bender RCMA423 - Changing from Overcurrent Operation to Window Operation; Factory Setting and Password Protection

Operation and setting
27
TGH1442en/06.2012
5.5.7 Changing from overcurrent operation to window opera-
tion
Use this menu item to set whether the response values of the device apply to
overcurrent (HI) or undercurrent operation (Lo). In addition, window opera-
tion (In) can be selected.
5.5.8 Factory setting and password protection
Use this menu to activate the password protection, to change the password
or to deactivate the password protection. In addition, you can reset the device
to its factory settings.
a) Activating the password protection
2x
>1,5 s
2x
>1,5 s
2x