Operation and setting
26
TGH1442en/06.2012
5.5.6 Setting the time delays
The following delays can be set:
Response delay t
on1
(0...10 s) for K1, and t
on2
(0...10 s) for K2
Start-up delay t (0...10 s) when the device is being started
Common delay on release t
off
(0...99 s) for K1, K2. The setting t
off
is only
relevant when the fault memory M is deactivated.
The operating steps for the setting of the response delay t
on1
and the starting
delay t are illustrated by way of example.
Setting the response delay t
on1
Setting the start-up delay t
To Next Page
Loading...
