BENDIX AUTOVUE FLC-20 User Manual

1
®
Bendix
™
AutoVue
®
FLC-20
™
Camera
SD-64-20124
1.0 DESCRIPTION
The Bendix
™
AutoVue
®
FLC-20
™
camera is a component
used in many Bendix safety systems, including:
• The AutoVue
®
Lane Departure Warning (LDW) System by
Bendix CVS; and
• The Bendix
®
Wingman
®
Fusion
™
Active Safety System.
For more information about the Bendix Wingman Fusion
System, see Service Data Sheet, SD‑61‑4963. For free
downloads of Service Data Sheets, visit the Bendix website
at bendix.com.
This document covers installation, troubleshooting, and
replacement for this camera.
Bendix safety technologies complement safe driving
practices. No commercial vehicle safety technology
replaces a skilled, alert driver exercising safe driving
techniques and proactive, comprehensive driver
training. Responsibility for the safe operation of the
vehicle remains with the driver at all times.
The camera bracket
is attached to the
windshield, and the
camera snaps into it.
(See Section 3.1)
Camera Lens
Radar Sensor
Camera
Figure 1 – Bendix
™
AutoVue
®
FLC-20
™
Camera
Figure 2 – Operational View
Detected Forward
Vehicle
RADAR Beam
Road Lane Markings
Vehicle Equipped with the
Bendix
®
Wingman
®
Fusion
™
System
Bendix
™
AutoVue
®
FLC-20
™
Camera
Windshield-mounted Visible
Light Camera
Roof-mounted Telematics
Antenna
Front Bumper-Mounted
Radar Sensor
NOT TO SCALE
Camera View
(See SD-61-4963 for the Bendix
®
Wingman
®
Fusion
™
Active Safety System)

BENDIX AUTOVUE FLC-20 Specifications

General

Brand	BENDIX
Model	AUTOVUE FLC-20
Category	Automobile Accessories
Language	English

Summary

Introduction and Safety

Product Description

Provides a general description of the Bendix AutoVue FLC-20 camera and its applications.

General Safety Guidelines

Essential safety instructions to prevent injury or death during vehicle maintenance and operation.

Troubleshooting the FLC-20 Camera

Troubleshooting Safety Guidelines

Specific safety precautions to be observed during troubleshooting procedures.

DIU System Icons and Status

Explains Driver Interface Unit (DIU) icons indicating system status, initialization, and errors.

Camera Test Image Procedure

Steps to capture a test image using diagnostic software to check camera functionality.

Comprehensive Troubleshooting Steps

Covers disabling LDW, diagnostic trouble codes, ACom software, power, and communication issues.

Installation and Maintenance

Windshield Mounting Instructions

Detailed instructions for top and bottom mounting of the camera bracket on the windshield.

Camera and Bracket Removal Procedures

Step-by-step guide for safely removing the camera and its mounting bracket.

Maintenance and System Notes

Covers basic maintenance, camera interchangeability, and telematics wiring considerations.

Appendices and References

Appendix A: Diagnostic Code References

Table of SPN/FMI codes, DTCs, and their corresponding service action codes.

Appendix B: System Component Schematic

Provides a schematic diagram of the Bendix Wingman Fusion system components.

Appendix C: Controller Configuration Changes

Details controller configuration parameters and update procedures.