BENDIX AUTOVUE FLC-20 User Manual

6
2.4 TEMPORARILY DISABLE THE
LANE DEPARTURE WARNING (LDW)
To avoid erroneous LDW warnings in areas such as
construction zones – where the non-standard or overlapping
road markings present might cause false alerts – the
Bendix
®
Wingman
®
Fusion
™
Active Safety System (Fusion)
has an enable/disable switch. The Bendix switch design or
a similar OEM switch may be used. See Figure 5.
Figure 5 – Example of an LDW
Enable/Disable Switch
For vehicles that have the LDW switch hard‑wired to the
SafetyDirect
®
by Bendix CVS Web Portal Processor, and a
functioning On Board Computer (OBC)/Telematics system:
The enable/disable switch used by the Lane Departure
Warning (LDW) system also functions – when depressed
for six (6) seconds – to activate a manual request to
transmit the last ve seconds and next ve seconds of
bu󰀨ered video data.
2.5 SETTING DIAGNOSTIC
TROUBLE CODES
If, during operation, the Bendix Wingman Fusion system
detects a problem with the Bendix
™
AutoVue
®
FLC-20
™
camera, a DTC will be set and – depending on the OEM –
the driver will be alerted on the dash display with an icon
or similar method. In these cases, some features of the
Fusion system will not be available.
If, for an extended period of time, the system detects that
the camera is blocked by dirt, snow, ice, etc., a Diagnostic
Trouble Code (DTC) will typically be set.
2.6 BENDIX
®
ACOM
®
DIAGNOSTIC SOFTWARE
Bendix
®
ACom
®
Diagnostic Software is a PC-based software
program available as a download from the Bendix website
(bendix.com). This software provides the technician with
access to all the available Electronic Control Unit (ECU)
diagnostic information and conguration capability. For
Fusion system diagnostics, use the current version of
Bendix ACom Diagnostic Software. See Figure 6.
Figure 6 – Bendix
®
ACom
®
Diagnostic Software

BENDIX AUTOVUE FLC-20 Specifications

General

Brand	BENDIX
Model	AUTOVUE FLC-20
Category	Automobile Accessories
Language	English