BENDIX AUTOVUE FLC-20 User Manual

5
Take a Test Image Using the Latest Version of Bendix
®
ACom
®
Diagnostic Software
Troubleshooting a camera may be assisted by viewing a test image from the camera to ensure it is not blocked, or
has another problem.
• Open Bendix
®
ACom
®
Diagnostic Software and select “FLC-20” from the opening page list, and the “Start with
ECU” button.
• Select “Snapshot” from the choices.
1. Click “Read”. A camera snapshot is
taken. (Approximately 5 minutes.)
2. Inspect the image.
3. Save, if needed, using “Export”.
2.3 CAMERA TEST IMAGE

BENDIX AUTOVUE FLC-20 Specifications

General

Brand	BENDIX
Model	AUTOVUE FLC-20
Category	Automobile Accessories
Language	English