BENDIXKing KFC 230 AeroCruze - GPS to ILS Approach

Operation
| 45 |
© Honeywell International Inc. Do not copy without express permission of Honeywell.
KFC 230 AeroCruze Autopilot Pilot's Guide
89000019-001
Rev 2 May 2019
GPS TO ILS APPROACH
SCENARIO: MAINTAIN 2500 UNTIL ESTABLISHED, CLEARED FOR
THE ILS 04R APPROACH (FLYING IN GPS NAV ACTIVE MODE)
1 Turn the OBS on the HSI to the inbound course (045°).
2 Press the APR button when cleared for the approach. APR and the
armed indicator box display in green, and the navigation source
(GPS) displays in magenta.
Figure25 GPS to ILS Steps 1-2
3 During the automatic localizer capture process (HSI source
change via pilot input, or automatically when configured), APR
mode remains active and the source changes from GPS to LOC
and displays in green. (See NAV radio pilot guide for specific
information.)
Figure26 GPS to ILS Step 3
NOTE: When configured, GPS to ILS functionality allows
the pilot to load the approach into the FMS, enabling
the FMS to give guidance to the autopilot and flight
director for the entire procedure until reaching the
final approach fix.
REF: