HD-14T Four Post Lift 3 P/N 5900037 — Rev. F — February 2022
Table of Contents
Introduction 3 Operation 61
Shipping Information 4 Maintenance 64
Safety Considerations 4 Troubleshooting 66
Components 7
Wiring Diagrams 67
Specifications 9 Labels 68
FAQs 11 Parts Drawings 71
Installation Checklist 12 ALI Store 74
Installation 13 Maintenance Log 75
Introduction
This manual describes the following BendPak Four-Post Lift:
• HD-14T. Four-Post Lift with an overall width of 127.5" / 3,239 mm raising Vehicles up to
14,000 lbs. (6,350 kg).
This manual is mandatory reading for all users of the HD-14T, including anyone who
installs, uses, maintains, repairs, or wants to know more about them.
Keep this manual on or near the equipment so that anyone who uses or services it can read it. If you
are having issues, refer to the Troubleshooting section of this manual for assistance.
⚠ DANGER Use care when installing, operating, maintaining, or repairing this equipment; failure to
do so could result in property damage, product damage, injury, or in very rare cases,
death. Make sure only authorized personnel operate this equipment. All repairs must
be performed by an authorized technician. Do not make modifications to the unit; this
voids the warranty and increases the chances of injury or property damage. Make
sure to read and follow the instructions in this manual and on the labels on the unit.
Technical support and service is available from your dealer, on the Web at bendpak.com/support,
by email at support@bendpak.com, or by phone at (800) 253-2363, extension 196.
You may also contact BendPak for parts replacement information at (800) 253-2363, extension
191; please have the model and serial number of your unit available.
To Next Page
Loading...
