22
10,000 POUND CAPACITY SURFACE MOUNTED TWO-POST LIFTS
This instruction manual has been prepared speci cally for you. Your new lift is the product of over 40 years of
continuing research, testing and development; it is the most technically advanced lift on the market today.
READ THIS ENTIRE MANUAL BEFORE INSTALLATION & OPERATION BEGINS.
RECORD THE LIFT AND POWER UNIT INFORMATION HERE. YOU MAY FIND THIS INFORMATION
LOCATED ON THE SERIAL NUMBER DATA PLATE AND POWER UNIT DATA PLATE
This information will be required when calling for parts or warranty issues.
Only replace parts with BendPak approved parts.
PRODUCT WARRANTY
BendPak two-post lifts are covered under warranty for ve years on equipment structure, to be free of defects in material
and workmanship. Power units, hydraulic cylinders, and all other assembly components (such as cables, chains, valves,
switches etc.) are warrantied for one year against defects in material or workmanship under normal use. BendPak Inc.
shall repair or replace at its discretion, within the warranty period, those parts returned to the factory freight, prepaid, which
prove upon inspection to be defective. BendPak Inc. will pay labor costs for the rst 12 months only on parts returned as
previously described.
The warranty does not extend to...
defects caused by ordinary wear, abuse, misuse, negligence, shipping damage, improper installation, voltage or
lack of required maintenance;
damages resulting from purchaser’s neglect or failure to operate products in accordance with instructions
provided in the owner’s manual(s) and/or other accompanying instructions supplied;
normal wear items or service normally required to maintain the product in a safe operating condition;
any component damaged in shipment;
other items not listed but may be considered general wear parts;
damage caused by rain, excessive humidity, corrosive environments or other contaminants.
THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT
FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT
MAY RESULT FROM ANY DEFECT, FAILURE, OR MALFUNCTION OF A BENDPAK INC. PRODUCT OR THE
BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.
WARRANTY IS NOT VALID UNLESS
WARRANTY CARD IS RETURNED.
To Next Page
Loading...
Need help?
General
