BendPak XpR-18C User Manual

2424
WARNING!
You MUST re-install top Carriage-stop bolt (shown below) after Top Trough
is installed and secured. Tighten Carriage-stop bolt to 2-3 ft.-lbs. of torque
upon final installation inspection. These instructions must be followed to insure
proper installation and operation of your lift. Failure to comply with these
instructions can result in serious bodily injury and or death and or void product
warranty. Manufacturer will assume no liability for loss or damage of any kind,
expressed or implied resulting from improper installation or use of this product.

BendPak XpR-18C Specifications

General

Brand	BendPak
Model	XpR-18C
Category	Lifting Systems
Language	English