BendPak XPR-9 Series User Manual

XPR-9 Series Two-Post Lifts 61 P/N 5900371 — Rev. D2 — May 2023
⚠ WARNING You can stack the optional Auxiliary Adapters, but only up to 9 in. If you stack
Auxiliary Adapters above 9 in., the Vehicle could become unstable and slip off the
Lift, possibly damaging the Lift, damaging the Vehicle, and injuring anyone under it.
⚠ WARNING Use the correct Adapters. Do not attempt to lift trucks or other frame type vehicles
with standard Rubber Contact Pads.
⚠ WARNING Never use the Lift with missing or damaged rubber Contact Pads. Always replace
Rubber Contact Pads when worn or damaged.
• Quick-Fit Slotted Pinch-Weld Pucks or Pads — Always use slotted Pinch-Weld Pucks
(5210263) or slotted Pinch-Weld Pads (5210254) when lifting Vehicles on Manufacturer Approved
Pinch-Weld Jacking Points. These convenient tear-resistant urethane Adapters simply fit over the
existing round Contact Pads.
• Frame Cradle Adapters — Required for use when lifting trucks, vans or other frame Vehicles
that require additional stability. (5215761) Set of 4.

BendPak XPR-9 Series Specifications

General

Brand	BendPak
Model	XPR-9 Series
Category	Lifting Systems
Language	English