Benelli 752S - Throttle Grip; Brake and Shift Pedals

For your safety – pre-operation checks
EN
4
4 - 2
• Check operation.
• If soft or spongy, have Benelli dealer bleed hydraulic system.
• Check brake pads for wear.
• Replace if necessary.
• Check uid level in reservoir.
• If necessary, add specied brake uid to specied level.
• Check hydraulic system for leakage.
Rear brake
ITEM CHECKS
• Check operation.
• Lubricate cable if necessary.
• Check lever free play.
• Adjust if necessary.
Clutch
• Make sure that operation is smooth.
• Check throttle grip free play.
• If necessary, have Benelli dealer adjust throttle grip free play and lubricate cable and grip housing.
Throttle grip
• Make sure that operation is smooth.
• Lubricate if necessary.
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
Control cables
Brake and shift
pedals
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
Drive chain
Wheels and tires