22
Tre 1130 K
DANGER
Failure to switch the turn indicators on or off at the right time may cause an accident.
Always switch on the indicators before turning or changing lanes.
Then be sure to switch off the indicators after completing the operation.
Clutch lever
It is used to engage/disengage the clutch.
Horn button
It is used to attract the attention of other road users in case of danger.
Control Lights
Pushing the switch you can turn the sidelights into the headlights or dipped headlights on beam or low beam.
Control Turn indicators
It is used to show the rider's intention to change direction or lane.
High beam flasher button
It is used to attract the attention of other road users in case of danger. When the high beam is on, the function is
inactive.
To Next Page
Loading...
