49
For the front projector regulation use the 2 (right and
left) register screws under the projector.
The projector can regulate the right and left parable
separately, unscrew to lower the light beam, screw to
raise the light beam.
Front projector regulation
5.3.3
Adjustment of minimum engine
rpm
DANGER
Never perform the adjustment
while riding.
5.3.4
Work cable knob to adjust engine idling speed.
Tightening it will increase the minimum rpm.
Loosening it will decrease the minimum rpm.
The idle speed should range from 1200 to 1300 rpm.
INDEX
To Next Page
Loading...
