51
5.4
Adjustments that has to be done by a Benelli Authorized Workshop or by
the end User
WARNING
The following adjustments are reserved to the Benelli Authorized Workshops.
Never perform the adjustment while riding.
Rear shock absorber adjusters
The shock absorber has outer adjusters that
enable you to adjust your motorcycle to the
load.
The adjuster (1) located in a lower position, on
the connection holding the shock absorber to
the swingarm, controls rebound damping.
The adjuster (2) on the shock absorber
expansion reservoir controls compression
damping.
Turn the adjusters (1) and (2) clockwise to
increase damping, or counter clockwise to
reduce damping.
5.4.1
Adjusting suspension spring preload
2
1
Spring preload
Rebound damper hydraulic device
To Next Page
Loading...
