Checking the coolant level
Check the coolant level while the engine
is o and cold.
The check must be performed after
placing the motorcycle in an upright
position on a horizontal surface.
The level in the cup must be included
between the MAX and MIN references.
In the case the cooling liquid level is
under the MIN reference, remove the cup
plug and make a topping up, or bring the
motorbike in the closest Benelli
Authorized machine shop.
CAUTION
Do not start the engine if
the coolant level is below
the MIN mark.
Coolant sight glass
71
6.6
INDEX
To Next Page
Loading...
