Benelli TRE-K899 - Selecting the Display Functions

34
4.4
Selecting the display functions
CAUTION
The display modication or regulation
operations, must be made 3 seconds after the
motor starting, avoiding to pull the clutch lever
for a while.
The display is provided with 3 main functions:
1) "TOTAL”/“TRIP"
2) "CHRONO“/”LAP"
3) "CLOCK“/”TRIP"
To move from the visualisation 1 "Total”/”Trip" to the
visualisation 2 press the "Start" button for more than two
seconds.
To move from the visualisation 2 "Chrono”/”Lap" to the
visualisation 3 press the "Start" button for more than two
seconds (when the chronometer is switched).
To switch from function 3 "Clock"/"Trip" to function 1, keep
pressed the "Start" button for more than two seconds.
"TOTAL”/“TRIP"
"CHRONO“/”LAP"
"CLOCK“/”TRIP"
1
3
2
1
(Start>2sec)
(Start>2sec)
(Start>2sec with
chronometer o)