Benelli TRE-K899 - Adjusting the Clock

37
4.5
Adjusting the clock
Switch to function 3.
Press the "Start" button (> 2 sec); the rst gure will start ashing.
Repeatedly press the "Start" button until the desired gure has been entered.
Press the "Start" button (> 2 sec.) to enter the following gure.
Repeat the above procedure to enter the second gure of the "hours", the rst and second gure of the "minutes".
Press the "Start" button (> 2 sec.) to conrm the time adjustment and to stop the selection (the ashing).
OPERATION