52
Check the rear suspension settings in the position indicated by the arrow.
NOTE: At the moment of delivery of the motorcycle, the rear suspension is adjusted in the standard conguration,
with damper spring length of 138 mm (5.43 in) [14 mm (0.55 in) of preload].
DANGER
The high temperature of the
exhaust pipes can cause burns.
Before adjusting the rear
suspension, shut o the engine
and wait until the exhaust pipes
have thoroughly cooled.
The rear shock absorber
contains highly compressed
gas. Do not try to open or
disassemble it in any way.
CAUTION
When you estimate the rear
suspension settings, never push
or pull in any way on the
exhaust muer and on the tail.
They would be certainly
damaged.
OK
To Next Page
Loading...
