June 2004 9507EM/5
2-5
2 to 9 Tonne Dumper Instruction Manual
Machine Data
For Your Safety
If the Machine Develops a Fault
z Park the machine in a safe area, if possible
z Remove the Start Switch Key
z Attach a warning tag to the machine
z Contact a qualified person to rectify the fault
z Do not place hands, arm etc. in any area where there is a hydraulic leak while the hydraulic system is
pressurised
The Repair Area
z The repair area should be level, clean, dry and have adequate light and ventilation
z Keep the floor clean, wipe up spilt oil and grease
z Always use the correct tool for the job and ensure tools are kept in good condition
z Jacks, hoists, lifting chains and ropes should be checked before using. Do they have sufficient lifting
capacity?
z Do not attempt to lift heavy objects on your own
When Repairing
z Prop an elevated skip
z Always wear eye protection
z Always wear ear protectors when grinding or working in a noisy environment
z Always wear goggles or a face mask when grinding or drilling
z Always wear the correct goggles or protector when welding or burning
z Release any pressure in the hydraulic circuit before carrying out hydraulic system repairs etc.
z Always block the wheels before carrying out any repairs
z If the machine is suspended or lifted always support the machine on adequate blocks
z Always remove the start switch key to stop accidental starting
z Never work with the engine running unless absolutely necessary
z Never start the engine unless the area is well ventilated
z Always exercise extreme caution when welding, grinding or burning, against fire risk. Ensure adequate
fire extinguishers are available
z Never smoke or leave the engine running when refuelling
z Always use Genuine Benford Spare Parts
z Always test the machine thoroughly before putting it back to work
Observing these points will not make the repair of the machine safe but combined
with the skill and knowledge of a trained fitter they will certainly help
To Next Page
Loading...