June 2004 9507EM/5
2-39
2 to 9 Tonne Dumper Instruction Manual
Maintenance
If machine is to be stored for a long period of time the following
procedures should be applied :
z Thoroughly wash down the exterior of the machine and
remove any build up of material
z Grease all greasing points
z Start the engine and warm it up. Drain engine oil and refill
with clean fresh oil to the correct specification. See engine
manufacturers handbook for further information on
prolonged engine storage with regards to anti-corrosion oils
and fluids.
Contaminated Water / Fluids / Oils Must Be Disposed of Safely
z Check the hydraulic oil level and top up as required
z Store the machine on solid level ground which is not liable
to flooding, standing water or airborne contamination.
z Smear any exposed metal parts with grease
z Leave the parking brake in the off position
Chock the Wheels Securely to Prevent the Dumper Moving
Preservation and Storage
Finally
Make Sure this Instruction Manual is Placed in its Container on Engine Canopy
Instruction Manual Holder
To Next Page
Loading...