Need help?Do you have a question about the Benning PV 2 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Power Measurement | Yes |
| Voltage Measurement Range | 0-1000V DC |
| Insulation Resistance Measurement | No |
| Safety Rating | CAT III 1000V |
| DC Voltage Measurement Accuracy | ±1% |
| DC Current Measurement Range | 0-10A DC |
| DC Current Measurement Accuracy | ±1% |
| Continuity Test | No |
| Diode Test | No |
| Safety Standard | IEC 61010 |
| Accuracy | ±1% |
Visual guide to the BENNING PV 2 device's front panel, including controls and display.
Description of the BENNING PV 2's top side, highlighting connectors and ports.
Explanation of symbols, readings, and status messages on the BENNING PV 2 display.
Technical details for RPE measurement, including current and accuracy.
Specifications for measuring PV module/string open-circuit voltage (Vo/c).
Specifications for measuring PV module/string short-circuit current (Is/c).
Technical details for Riso measurement, including test voltages and accuracy.
Specs for voltage measurements using the device's 4mm test sockets.
Specs for current measurements using the optional BENNING CC 3 adapter.
Essential steps before taking measurements, including device settings.
Step-by-step guide for performing RPE tests on PV systems.
Procedure for automated measurements on PV generators.
Instructions for performing AC and DC voltage measurements.
Steps for conducting insulation resistance tests (2-pin method).
How to store, recall, and manage measured data in the device memory.
Guide to establishing radio communication with the BENNING SUN 2.
Comprehensive list of error codes and their corresponding remedies.
Detailed instructions for replacing the device's batteries and fuses.
Information on instrument calibration and proper end-of-life disposal.
To Next Page
