Need help?Do you have a question about the Benning PV 1-1+ and is the answer not in the manual?
General| Category | Test Equipment |
|---|---|
| Display | LCD |
| Voltage Measurement Accuracy DC | ±(0.5% + 2 digits) |
| Continuity Test | Yes |
| Diode Test | Yes |
| Data Logging | No |
| Voltage Measurement Range DC | 0.1 - 1000 V |
| Voltage Measurement Accuracy AC | ± (1.0 % rdg + 3 dgt) |
| Current Measurement Accuracy DC | ±(1.0% + 3 digits) |
| Current Measurement Accuracy AC | ± (1.5 % rdg + 5 dgt) |
| Resistance Measurement Range | 0 - 20 MΩ |
| Frequency Measurement Range | 1Hz to 10MHz |
| Temperature Measurement Range | -20 °C - +1000 °C |
| Temperature Measurement Accuracy | ±(1.0% + 3 digits) |
| Interface | No |
| Operating Temperature | 0 °C - +40 °C |
| Storage Temperature | -20 °C - +60 °C |
| Safety Standard | IEC 61010-1 |
Provides general information and purpose of the operating manual.
Identifies the intended users of the operating manual.
Outlines the necessary prerequisites for understanding the manual.
Details the release history of the operating manual.
Provides contact information for technical assistance and repairs.
Explains hazard symbols and their meanings for user safety.
Lists the standards and regulations the device complies with.
Defines symbols displayed on the device and within the manual.
Specifies how the device should be used and potential misuse.
Details specific hazards and risks associated with the device's operation.
Provides an overview of the device's physical components and layout.
Explains the different sections and information shown on the device's digital display.
Describes the operational functions and features of the device.
Specifies the accuracy of the device's measurements.
Details the device's measuring ranges for resistance.
Details the device's measuring ranges for voltage.
Details the device's measuring ranges for current.
Outlines essential prerequisites before conducting tests and measurements.
Guides on properly connecting the safety measuring lines to the device.
Explains how to set up device parameters like APO and date/time.
Describes the procedure for null balancing measuring lines.
Details the process for measuring protective conductor resistance.
Explains how to perform continuous measurements.
Describes the automated measurement of PV parameters.
Step-by-step instructions for performing automatic PV measurements.
Details how to measure DC and AC voltages using the device.
Explains current measurement using the optional clamp adapter.
Guides on comparing measurements of multiple PV modules or strings.
Introduces the optional BENNING SUN 2 accessory.
Details the process for pairing the device with the SUN 2.
Explains how to disconnect the device from the SUN 2.
Describes how to manage radio transmission for the SUN 2.
Provides an overview of required maintenance tasks and intervals.
Steps to ensure the device is de-energized before maintenance.
Instructions for cleaning the device to maintain its condition.
Guides on how to replace the device's batteries.
Explains the importance and procedure for device calibration.
Details the process for replacing the internal fuse.
Specifies the device's protection class against electrical hazards.
Indicates the device's resistance to environmental contamination.
Details the device's protection against solid objects and water ingress.
Specifies voltage categories for safe use with measuring lines.
Provides the physical dimensions of the device.
States the weight of the device with batteries.
Indicates the expected battery operating duration.
Describes the device's compliance with EMC standards.
Technical specifications for the 4 mm safety measuring lines.
Technical specifications for the PV safety measuring lines.
Lists operational parameters like duration, altitude, and temperature.
Specifies conditions for storing the device.
Details the allowed ambient temperature range for operation.
Specifies the maximum allowable relative humidity.
To Next Page
