Benning PV 1-1+ - BENNING SUN 2 (optional) - Unpairing Device

5.9 BENNINGSUN2 (optional)
Operation
5290 / 06/2023 enBENNING PV 1-1+36
5.9.2 Unpairing the device from the BENNINGSUN2
Requirements
• Paired BENNINGSUN2 (optional accessories) [}page35]
Procedure
1. Switch off the device.
2. Simultaneously press and hold the two keys “R
PE
” and “Auto” of the device for approx.
10seconds until the BENNINGSUN2 is unpaired.
The device indicates the successful unpairing via an acoustic signal and shows the serial
number of the previously paired BENNINGSUN2 as well as the “W / m²”symbol on the
digital display.