Benning PV 1-1+ - History

1.2 History
Introduction
5290 / 06/2023 enBENNING PV 1-1+8
Purpose of the operating manual
This operating manual describes the device and provides you information about how to handle
it.
Keep this operating manual in a safe place for later use. Read this operating manual before
handling the device and follow the instructions.
NOTE
Disclaimer of liability
Please make sure that any person using the device has read and understood the instructions of
this operating manual before handling the device and that the instructions are adhered to in all
points. Non-observance of this operating manual might result in product damage, property
damage and/or personal injury.
Benning assumes no liability for damage and malfunctions resulting from the failure to observe
the instructions in this operating manual.
The devices are subject to continuous further development. Benning reserves the right to make
changes to the device’s design, configuration and technology. The information in this operating
manual corresponds to the state of technical knowledge at the time of printing. For this reason,
no claims for certain device characteristics can be derived from the contents of this operating
manual.
Information in this operating manual can be changed at any time without prior notice. Benning is
not obligated to make amendments to this operating manual or to keep it up to date.
Direct any technical questions to Technical Support [}page9].
Trademarks
All trademarks used are the property of their respective owners, even if they are not separately
marked as such.
1.2 History
Release number Amendments
06/2023 • Initial release
Table1: History