Benning PV 1-1+ - Measured Value Memory

Device description
4.2 Functions
5290 / 06/2023 en BENNING PV 1-1+ 19
4.2.1 Measured value memory
The device can store up to 200display indications. Depending on the measurement performed,
the protective conductor resistance, the open-circuit voltage, the short-circuit current, the
insulating resistance with testing voltage or the measured AC/DCcurrent are stored for each
memory location with a date and time stamp.
Storing measured values
Press the “Save”key to store the displayed measured values to the first free storage location.
Successful storage will be confirmed by the “STORE”symbol on the digital display.
Calling measured values
Press the “Measured value memory”key to recall the stored measured values with the
corresponding storage location number. The “RECALL”symbol appears on the digital display
and the storage location number is displayed.
Press the “Measured value memory”key again to switch to the next storage location and press
the “Save”key to switch to the previous storage location.
Deleting the measured value memory
Press the “Save”key and the “Measured value memory”key simultaneously to delete the entire
measured value memory.
Calling the average value
The device determines the average values of the open-circuit voltage and the short-circuit
current of the entire measured value memory and stores them in storage location0.
Switch to storage location0 to call the average values. The “RECALL”symbol appears on the
digital display and the average values of the open-circuit voltage and the short-circuit current
are displayed.
5% deviation from the average value
In case the displayed measured value deviates by 5% from the average value, the
“5%deviation”symbol flashes.