Need help?Do you have a question about the Benning ST 760 and is the answer not in the manual?
General| RCD test | Yes |
|---|---|
| Phase sequence | Yes |
| Memory | Yes |
| Interface | USB |
| Display | LCD |
| Power supply | Rechargeable battery |
| Operating Temperature | -10 °C to +50 °C |
| Storage Temperature | -20 °C to +60 °C |
| Type | Installation Tester |
| Standards | EN 61557 |
| Resistance Measurement | 0.01 Ω - 2000 Ω |
| Frequency Measurement | 45 Hz - 65 Hz |
| Insulation resistance | 0.01 MΩ |
| Low resistance | 0.01 Ω |
| Voltage | AC/DC |
| Weight | 0.8 kg |
Details critical safety notes to avoid injury and damage.
Identifies and describes the physical controls and interfaces of the tester.
Provides a visual overview of available system settings.
Configuration for network information, host name, and IP settings.
Overview of the database structure and how to navigate its screens.
Procedures for creating, changing, copying, and deleting customer entries.
Creating and managing test sample entries using IDs and barcodes.
Managing user accounts, roles, and passwords for the tester.
Modifying limits for specific tests, with detailed procedures for changing and saving.
Creating and managing custom questions for visual inspections.
Creating, changing, and managing custom test procedures.
Instructions for updating the tester's software via USB stick.
Procedures for updating the tester's software using a network connection.
Steps for starting automatic tests, including visual inspection and defect handling.
How to start, stop, interrupt, and reset automatic tests.
Steps for analyzing results, printing, discarding, and saving test data.
Summary of requirements for testing welding equipment per VDE 0544-4.
Flowchart for manual testing of welding equipment under VDE 0544-4.
Steps to start manual tests for welding equipment and conduct visual inspections.
Guidance on selecting, starting, stopping, and controlling individual tests.
Managing individual tests, polarity reversal, and analyzing test results.
Describes measurement methods for leakage and fault currents.
Explains the purpose and application of protective conductor resistance tests.
Step-by-step guide for conducting RPE measurements.
Explains the purpose of insulating resistance measurement and safety precautions.
Details application scenarios for RInsu tests across different classes and standards.
Steps for conducting insulating resistance measurements.
Explains protective conductor current tests and their applications.
Steps for conducting protective conductor current measurements.
Explains contact current tests and their applications.
Steps for conducting contact current measurements.
Explains device leakage current tests and their applications.
Steps for conducting device leakage current measurements.
Explains patient leakage current tests and their applications.
Steps for conducting patient leakage current measurements.
Details technical specifications, measuring capabilities, and device functions.
Lists preset factory limits for various tests like RPE, RInsu, IPE, ICont, and PRCD.
To Next Page
