86
26 Disposal
The manufacturer attaches great importance to the environmental
compatibility of the entire product range.
Environmental compatibility was a very important criterion for the
selection of suppliers. The individual components are mainly
transported in reusable packaging.
The installation as well as the associated transport packaging
predominantly consist of recyclable raw materials.
26.1 Packaging
Please keep the original packaging for later
dispatch.
The packaging is required when you send the tester
to our service department for calibration.
Transport damages due to improper packaging are
excluded from warranty.
26.2 Recycling of components
Components and parts contained in the device are
partly subject to the requirements of the Electrical
and Electronic Equipment Act (German: “ElektroG”)
and must be recycled.
To Next Page
Loading...
