BenQ MK2442 - Initialize Your TV; TV Initialization and Setup; View the TV Programs; TV Program Viewing Controls

English
10 Section 1: Quick Start Guide
Before you can use your TV to view TV programs, you need to let it search for and tune
TV station programs appropriate to your region. This process only needs to be done when
the TV is newly installed, or whenever you install it in OSD menu for convenience of
operation.
1. When Language is highlighted, use the
◄
or
►
buttons to select the language dis-
played on the menu.
2. Press
▼
button to select Auto Tuning and press the OK button.
3. Press
◄
or
►
to select the Country where you operate the TV, then select Start and
press OK. The Auto Tuning automatically creates a list of receivable channels. Press
the BACK button at any time to interrupt the memorization process. (The list cannot
be created if interrupted)
10. Initialize your TV
Press Power button on the remote control. the TV will turn on and the power indicator
will light up blue. When first turned on (and until tuned), the Initial Menu will display:
11. View the TV programs
• PressPROG
▲
or PROG
▼
on the remote control to sequentially cycle through
your TV channels.
 • Toselectasingle-ordouble-digitchannel,pressthecorrespondingchannel
selection buttons on the remote control. For example, to select channel 8, press 0
and 8 on the remote control.
 • PressVOL
or VOL on the remote control to increase volume. The volume
indicator will increase in length as volume rises.
 • PressMuteontheremotecontroltoturnoffthesoundtemporarily.PressMute
once more, or press VOL or VOL to restore the sound level.
 • YoucanpressRETURN on the remote control to quickly return to the previous
viewed channel.