42 Maintenance
Indicators
Light
Status & Description
System Messages
Stand-by mode
Powering up
Normal operation
Normal power-down cooling
Download
CW start fail
Burn-In Messages
Burn-in ON
Burn-in OFF
Lamp Error Messages
Lamp error in normal operation
Lamp is not lit up
Thermal Error Messages
Fan 1 error (the actual fan speed is outside the desired speed)
Fan 2 error (the actual fan speed is outside the desired speed)
Temperature 1 error (over limited temperature)
Thermal Sensor 1 open error
Thermal Sensor 1 short error
Thermal IC #1 I2C Connection error
: Off
: Orange On : Green On : Red On
: Orange Flashing : Green Flashing : Red Flashing
To Next Page
Loading...
