Operation40
Note that the menu items are available when the projector detects at least one valid signal.
If there is no equipment connected to the projector or no signal detected, limited menu
items are accessible.
Main menu Sub-menu Options
5.
SYSTEM
SETUP:
Advanced
High Altitude Mode On/Off
Audio
Settings
Mute On/Off
Volume
Power On/Off Ring
Tone
On/Off
Lamp
Settings
Lamp Mode Normal/Economic/SmartEco
Reset Lamp Timer
Lamp Timer
Security
Settings
Change Password
Change Security
Settings
Power On Lock
Baud Rate
2400/4800/9600/14400/19200/
38400/57600/115200
Test Pattern On/Off
Closed
Caption
Closed Caption Enable On/Off
Caption Version CC1/CC2/CC3/CC4
Standby
Settings
Audio Pass Through Off/Audio In/Audio L/R/HDMI
Reset All Settings Reset/Off
6.
INFORMATION
Current System Status
• Source
• Picture Mode
• Lamp Mode
• Resolution
• 3D Format
• Color System
• Lamp Usage Time
• Firmware Version
To Next Page
