OVERVIEW
The Omnia8 and Omnia4 control panels
Omnia8 is a security system with 8 zones and 4 partitions. Omnia4 is a
security system with 4 zones and 4 partitions. The basic systems com-
prises a Main Unit, a built-in communicator and 1 keypad. The Control
panels can control up 16 remote devices (key readers / keypads), with a
maximum of 8 keypads including the one supplied, and 128 different digital
keys.
Communicator The built-in Digital Communicator can manage 8 telephone numbers for
communication with central stations and teleservice.
Voice messages The optional NormaVOX2 voice board can record and send up to 8 voice
messages to 1 or more of the 8 programmed telephone numbers.
All the Control panel features are described in this manual. Your Installer
will provide further details for proper use of the system.
Figure 1 shows a Omnia8 system with a Main Unit, keypad, key reader
and digital key. Digital keys, although not indispensable, greatly simplify
system control.
Glossary
Arming An option which puts the system IN SERVICE. Violation of the armed parti-
tions will generate an alarm.
Disarming An option which puts the system OUT-OF-SERVICE. Violation of the dis-
armed partitions will not generate an alarm.
Alarm A status which signals violation. Immediate intervention of authorized per-
sons will be required.
Keypad Set of keys (on keypad) used for manual control of the Omnia8 and Om-
nia4 systems.
Digital Key An electronic control key with a random code (selected from over 4 billion
combinations).
Key Reader A device which reads the digital key.
Alarm Zone A zone where one or more sensors can be connected.
Partition A group of zones that allow system partitioning, each partition can have its
own specific Times, Code PINs and digital keys.
OVERVIEW 5
To Next Page
Loading...
