Bentel Omnia 4 - GENERAL FEATURES; The Main Unit; The keypad

GENERAL FEATURES
The Main Unit
The Main Unit houses the main board, power supply unit, battery, and the
terminals for the connections of the Sensors, Sirens and auxiliary devices.
The keypad
The Control panel can be programmed and controlled from the keypads.
INDICATOR STATUS
Arm
OFF:
ON:
All partitions (enabled on the keypad) are
disarmed
At least one Partition (enabled on the keypad) is
armed
Alarm
OFF:
slow flashing:
fast flashing:
Standby status (no alarm)
Alarm memory
Alarm status
Trouble
OFF:
ON:
slow flashing:
No trouble
Trouble: use the Trouble Viewing Mode to identify
the trouble type
Trouble Viewing Mode running
Ready
ON:
OFF:
Ready to arm: ----arming will not generate an alarm
At least one unbypassed zone is in alarm status: ----
arming will generate an alarm
24h
OFF:
slow flashing:
fast flashing:
Tamper line balanced
Alarm memorized on the tamper line
Alarm memorized and tamper line open
Open
NOT IN USE
Bypass
OFF:
ON:
slow flashing:
No bypassed zones
At least one of the keypad zones is bypassed
Control panel is ready for zone bypass
Program.
OFF:
ON:
slow flashing:
fast flashing:
Control panel in standby status
Control panel enabled for Teleservice calls
Control panel in programming status
Control panel in service status (maintenance)
GENERAL FEATURES 7