3 Bentone
General
Table of contents
1. Safety Information ____________________________________ 4
2. Technical data _______________________________________ 7
2.1 Dimensions B 30 2A _______________________________ 7
2.2 Working field B 30 2A _____________________________ 8
2.3 Electric Specification ______________________________ 8
2.4 Setting of brake plate and air flow ___________________ 9
2.5 Recommended nozzle and pressure _________________ 9
2.6 Burner installation _________________________________ 9
2.7 Nozzle table _____________________________________ 10
2.8 Description B 30 2A ______________________________ 12
3. General instructions _________________________________ 13
3.1 General rules ____________________________________ 13
4. Installation _________________________________________ 14
4.1 Handling and lifting instruktion _____________________ 14
4.2 Acceptance inspection ____________________________ 15
4.3 Preparations for installation ________________________ 15
4.4 Distribution of oil _________________________________ 15
4.5 Electrical connection ______________________________ 15
4.6 Mount the burner on the boiler _____________________ 16
4.7 Check oil line seals _______________________________ 16
4.8 Air adjustment with damper motor __________________ 17
5. Burner installation ___________________________________ 18
5.1 Examples of basic setting B 30 2A __________________ 18
5.2 Setting values for nozzle and air damper _____________ 18
5.3 Setting of brake disc and air flow ___________________ 19
6. Burner servicing ____________________________________ 20
6.1 Servicing the combustion assembly ________________ 20
6.2 Servicing air dampers ____________________________ 21
6.3 Replacement of damper motor _____________________ 22
6.4 Servicing the fan _________________________________ 23
6.5 Replacement of oil pump __________________________ 24
6.6 Vibration ________________________________________ 25
7. Instructions Pump __________________________________ 26
7.1 SUNTEC AT2 45C, AT2 55C _______________________ 26
8. Replacement of electrical components ________________ 32
9. Oil burner control ___________________________________ 33
9.1 Wiring diagram _________________________________ 33
9.2 List of components _______________________________ 34
10. Fault Location ____________________________________ 35
10.1 Burner will not start _______________________________ 35
10.2 Burner will not start after normal use ________________ 35
10.3 Delayed ignition __________________________________ 36
10.4 Noise in pump ___________________________________ 36
10.5 Pump pressure __________________________________ 37
11. Log of flue gas analysis ____________________________ 38
12. Oil burners maintenance instructions _______________ 39
To Next Page
Loading...
