Bentone LMO14.113C2E - Combustion Device

29Bentone
165 405 08-2 2022-10-09
Components Service life – Recommended
replacement
Service life – Recommended
replacement Operating cycles
Control system 10 years 250,000 cycles
Pressure switch 10 years 250,000 cycles
Ignition system with  ame guard 10 years 250,000 cycles
UV  ame sensor 10,000 h N/A
Damper motor 500,000 cycles
Contactor 10 years 500,000 cycles
Burner Twice a year 3,000 h
Filter Twice yearly replacement 3,000 h replacement
Oil hose Once yearly replacement
Nozzle Twice yearly replacement 3,000 h replacement
Electrodes Replace/Clean twice a year Replace/Clean 3,000 h
Brake disc Replace/Clean twice a year Replace/Clean 3,000 h
Motor Twice a year 3,000 h
Drive shaft Check/replace in the event of damage Check/replace in the event of damage
Fan wheel Twice a year
Replace if need for cleaning/imbalance
3,000h
Replace if need for cleaning/imbalance
Tank Check for water once a year
Clean tank once a year
Oil  lter Twice a year 3,000 h replacement
Oil valve Leakage check twice a year Replace if leaky
The burner and its components must be recycled according to applicable regulations.
7. Service
Service and maintenance work may only be performed by quali ed
personnel. Perform operational check of all safety systems and components
at each service. Only Enertech original parts should be used when replacing
components.
!
Usecautionwhenoperatingtheburner,surfacesmaybehot.
7.1 Burner Service Schedule, Oil
Servicing must be carried out twice a year or after 3,000 hours of operation.
7.2 Component replacement intervals